| OR100-C18 |
Subscriber
Unit – 5GHz 2x2 MIMO with 18 dBi panel antenna |
| Wireless (RF) |
| MAC Protocol |
Proprietary polling-based protocol |
| Modulation Scheme |
BSPK, QPSK, 16Q-AM, 64-QAM, 256-QAM |
| Frequency Band |
4.9 GHz
Public Safety |
5.1 GHz - 5.925 GHz
Broadband Connectivity |
2.4 GHz
Radio Management |
|
| Channel Bandwidth |
20 / 40 / 80 MHz |
| Channel Spacing |
5 MHz |
| Max Transmit Power |
Up to 26 dBm (Combined) |
| Ethernet |
| Ethernet |
1 x GbE Port, 6KV Surge Protection |
| Speed |
10/100/1000Mbps, Half/Full Duplex, Auto Negotiation |
| Jumbo Frame |
9K bytes |
| Power source |
48V 0.5A |
| Cable length |
STP Cat5e: Max 130 meters
FTP Cat6: Max 180 meters |
| Hardware |
| Chip set |
Quad-Core CPU, 4x ARM Cortex A7 |
| Memory |
DDR 256 MB, Flash 32 MB |
| GPS |
On board GPS info via I2C,1PPS pulse, GPS Synchronization |
| Dying Gasp |
20ms (Max) |
| Thermal Sensor |
To monitor board temperature |
| On Side LEDs |
Green colour LEDs – Configurable |
| Ethernet Connector |
RJ 45 with LEDS |
